I'd put an end of it onto a furniture dolly. Then lift the other end up and onto the tailgate. Grab the other end off the dolly and lift/push into the truck. You'll also need an extender from the hitch to support the portion of the boat that is not sitting on the bed/tailgate. Overall looks a lot easier than loading a 500lb motorcycle.
Hi everyone and Merry Christmas! I installed my "factory" bed lights and I'm running into a problem - they won't light up! I ran out of daylight so...
Use the bed bolts for the winch??? Another option is to mount the winch on a 2x6 and put in the bed pockets so that you can remove the winch if you need full access to the bed. Could then put straps to the D rings to hold the 2x6 down while winching.
Just got a torque wrench from my girlfriend for my birthday, and figured I'd straighten out my slightly misaligned bed. Tried searching and couldn't...
Second Gen Tacomas that go off road, fetch heavy loads or have campers with heavy racks can suffer from the loose bed issue. The symptom will be a...
Of those that have recently purchased tacos.. which bed option did you go with? The long bed (73.5 inches) or the short bed (60 inches) .. I currently...
New Taco and am looking to start outfitting it. What are some good hard cover bed covers? I am looking for something that will offer protection, but...
6 bed bolts, remove gas cap (4 bolts), remove tail lights, bed electrical outlet, tailgate and camera. There are a few clips you must remove off the bed by the tail lamps.